IEC 63103-2020 pdf download.Lighting equipment – Non-active mode power measurement (IEC 63103:2020).
This document specifies methods of measurement of electrical power consumption in non- active mode(s), as applicable for electrical lighting equipment. This includes electrical lighting equipment incorporating non-illumination components.
This document specifies neither performance requirements nor limits on power consumption.
This document applies to lighting equipment connected to a supply voltage up to 1 500 V DC or up to 1 000 V AC.
This document is intended to be referenced by lighting equipment product standards for the measurement of non-active mode power consumption. Details for the non-active mode power consumption measurement and data presentation are specified in the product standards.
NOTE Annex A provides guidance on details specified in product standards.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
IEC 60050-845, International Electrotechnical Vocabulary – Part 845: Lighting (available at http://www.electropedia.org)
IEC 62504, General lighting – Light emitting diode (LED) products and related equipment – Terms and definitions
IEC TS 631 05, Lighting systems and related equipment – Vocabulary 1
ETSI EN 300 328 V2.1 .1 (201 6-1 1 ), Wideband transmission systems; Data transmission equipment operating in the 2,4 GHz ISM band and using wide band modulation techniques;
Harmonized Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU
3 Terms and definitions
the purposes of this document the terms and definitions given in IEC 60050-845,
IEC 62504 and IEC TS 631 05 and the following apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
• IEC Electropedia: available at http://www.electropedia.org/
• ISO Online browsing platform: available at http://www.iso.org/obp
3.1 lighting equipment
assembly of components used for the primary function of providing illumination, or any component thereof
EXAMPLE Integrated lamp, non-integrated lamp plus controlgear, luminaire, controlgear, luminaire with camera.
Note 1 to entry: Lighting equipment can also include non-illumination components that offer non-illumination functions.
Note 2 to entry: Within the primary function of illumination, applications like horticultural, UV disinfection, etc. are included.
3.2 component
constituent part which cannot be physically divided into smaller parts without losing its function
EXAMPLE Light source, power supply, control unit.
[SOURCE: IEC 60050-1 51 :2001 , 1 51 -1 1 -21 , modified – “of a device” and “particular” deleted.]
3.3 supply voltage
SV <of lighting equipment> voltage applied by electric connection to provide electric energy EXAMPLE 1 1 0 V AC, 230 V AC, 24 V DC, power over Ethernet.
[SOURCE: IEC 61 347-1 :201 5, 3.5, modified – Definition adapted for lighting and examples added.]
3.4 network
communication infrastructure with a topology of links, an architecture, including the physical components, organizational principles, communication procedures and formats (protocols)
3.5 function
<of equipment> predetermined operating characteristic EXAMPLE Illuminating, battery charging, wireless routing, auxiliary power output.
Note 1 to entry: Functions can be either on, off, in standby or networked standby.
Note 2 to entry: Typically, instructions for use specify which functions can be turned off and how.
3.6 mode
<of lighting equipment> distinct configuration of the status of functions
3.7 active mode
<of lighting equipment> mode with the illumination function on
3.8 non-active mode
<of lighting equipment> mode with the illumination function off
EXAMPLE Standby mode, networked standby mode, off mode, no-load mode.IEC 63103 pdf download.