IEC 62977-2-1-2021 pdf download
IEC 62977-2-1-2021 pdf download.Electronic displays – Part 2-1: Measurements of optical characteristics – Fundamental measurements.
This part of IEC 62977 specifies standard measurement conditions and measuring methods for determining the optical characteristics of electronic display modules and systems. These methods apply to emissive and transmissive direct view displays that render real 2D images on a flat panel. This document evaluates the optical characteristics of these displays under darkroom conditions. This document applies to the testing of display performance in response to standard analogue or digital input signals that are not absolute luminance encoded. The input signal is relative RGB without metadata information that codes for real luminance, colour space or colour coordinates. These methods are limited to input signals with typical OETFs such as defined in IEC 61 966-2-1 , ITU BT. Rec. 601 , ITU BT. Rec.709, and ITU BT. Rec.2020. The tests in this document are not approved for use with HDR input signals. NOTE A flat panel or flat panel display is a display with a flat surface and minimal depth that emits visible light from the surface. The display is subdivided into an array of electronically driven pixels which can be light valves modulating a backlight, or self-luminous. Emissive/transmissive/reflective hybrid displays can be flat panel or flat panel displays.
2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
IEC 60050-845, International Electrotechnical Vocabulary – Part 845: Lighting (available at www.electropedia.org)
IEC 61 966-2-1 , Multimedia systems and equipment – Colour measurement and management – Part 2-1: Colour management – Default RGB colour space – sRGB
IEC 62341 -6-1 , Organic light emitting diode (OLED) displays – Part 6-1: Measuring methods of optical and electro-optical parameters
IEC TR 62977-2-3, Electronic display devices – Part 2-3: Measurements of optical properties – Multi-colour test patterns
ISO 9241 -305, Ergonomics of human-system interaction – Part 305: Optical laboratory test methods for electronic visual displays
ISO 1 5076-1 :201 0, Image technology colour management – Architecture, profile format and data structure – Part 1: Based on ICC.1:2010
ISO/CIE 1 1 664-1 , Colorimetry – Part 1: CIE standard colorimetric observers
ISO/CIE 1 1 664-4, Colorimetry – Part 4: CIE 1976 L*a*b* colour space
CIE 1 5:2004, Colorimetry, 3 rd edition
CIE 1 68:2005, Criteria for the evaluation of extended-gamut colour encodings
CIE 233:201 9, Calibration, characterization and use or array spectroradiometers
ITU-R BT.601 , Studio encoding parameters of digital television for standard 4:3 and wide screen 16:9 aspect ratios
ITU-R BT.709, Parameters values for the HDTV standards for production and international programme exchange
ITU-R BT.2020, Parameters values for ultra-high definition television systems for production and international programme exchange
3 Terms, definitions and abbreviated terms
3.1 Terms and definitions
For the purposes of this document, the terms and definitions given in IEC 60050-845 and the following apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
• IEC Electropedia: available at http://www.electropedia.org/
• ISO Online browsing platform: available at http://www.iso.org/obp
3.1.1 signal pixel
smallest encoded picture element in the input image
Note 1 to entry: Signal pixel is defined as the unit of signal resolution.IEC 62977-2-1 pdf download.