IEC 60838-1-2016 pdf download
IEC 60838-1-2016 pdf download.Miscellaneous lampholders – Part 1: General requirements and tests.
This part of IEC 60838 applies to lampholders of miscellaneous types intended for building-in (to be used with general purpose light sources, projection lamps, floodlighting lamps and street-lighting lamps with caps as listed in Annex A) and the methods of test to be used indetermining the safe use of lamps in lampholders.
This part of IEC 60838 also covers lampholders which are integral with a luminaire. It covers the requirements for the lampholder only.
This part of IEC 60838 also covers lampholders integrated in an outer shell and dome similar to Edison screw lampholders. Such lampholders are further tested in accordance with the relevant clauses of IEC 60238.
Requirements for lampholders for tubular fluorescent lamps, Edison screw lampholders and bayonet lampholders are covered by separate standards.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
IEC 60061 (all parts), Lamp caps and holders together with gauges for the control of interchangeability and safety (available at http://std.iec.ch/iec60061 )
IEC 60061 -2, Lamp caps and holders together with gauges for the control of interchangeability and safety – Part 2: Lampholders
IEC 60061 -3, Lamp caps and holders together with gauges for the control of interchangeability and safety – Part 3: Gauges
IEC 60068-2-75:201 4, Environmental testing – Part 2-75: Tests – Test Eh: Hammer tests
IEC 601 1 2:2003, Method for the determination of the proof and the comparative tracking indices of solid insulating materials
IEC 601 1 2:2003/AMD1 :2009
IEC 60227 (all parts), Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V
IEC 60238, Edison screw lampholders
IEC 60245 (all parts), Rubber insulated cables – Rated voltages up to and including 450/750 V
IEC 60352-1 , Solderless connections – Part 1: Wrapped connections – General requirements, test methods and practical guidance
IEC 60399, Barrel thread for lampholders with shade holder ring
IEC 6041 7, Graphical symbols for use on equipment (available at http://www.graphical- symbols.info/equipment)
IEC 60529:1 989, Degrees of protection provided by enclosures (IP code) 1
IEC 60529:1 989/AMD1 :1 999
IEC 60529:1 989/AMD2:201 3
IEC 60598-1 :201 4, Luminaires – Part 1: General requirements and tests
IEC 60664-1 , Insulation co-ordination for equipment within low-voltage systems – Part 1: Principles, requirements and tests
IEC 60695-2-1 1 , Fire hazard testing – Part 2-11: Glowing/hot-wire based test methods – Glow-wire flammability test method for end products (GWEPT)
IEC 60695-1 1 -5, Fire hazard testing – Part 11-5: Test flames – Needle-flame test method – Apparatus, confirmatory test arrangement and guidance
ISO 1 456, Metallic and other inorganic coatings – Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium
ISO 2081 , Metallic and other inorganic coatings – Electroplated coatings of zinc with supplementary treatments on iron or steel
ISO 2093, Electroplated coatings of tin – Specification and test methods
ISO 4046-4:2002, Paper, board, pulps and related terms – Vocabulary – Part 4: Paper and board grades and converted products
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.IEC 60838-1 pdf download.