IEC 60512-1-2018 pdf download.Connectors for electrical and electronic equipment – Tests and measurements – Part 1: Generic specification.
This part of IEC 6051 2 is intended to be used as a basis for tests and measurements specifications for electrical connectors. It provides guidance and reference for tests and measurements within the IEC 6051 2 series. It includes the description and the practice of the various phases of tests and measurements (preparation, tests and measurements, requirements, documentation), in addition to basic terms and definitions applicable to any part of the IEC 6051 2 series. This document is used in conjunction with IEC 6051 2-1 -1 01 to establish uniform detail tests and measurements specifications. Detail tests and measurements specifications are applicable to electrical connectors and their components (e.g. connector inserts, connector housings, locking mechanisms, contacts and terminations) within the scope of technical committee 48.
They may also be used for similar devices when specified in a detail product specification. Detail tests and measurements specifications are used in conjunction with detail product specifications which prescribe the tests to be used, the required degree of severity for each of them and the permissible performance limits.
The detail product specification also specifies the deviations in procedures, which may be required when applying a test to the type of connector or its component under consideration, and it further specifies any special procedures which may be required. NOTE RF and fibre optical connectors are not dealt with by subcommittee 48B, however, hybrid connectors which additionally employ RF and/or fibre optic contacts, are handled by SC 48B in cooperation with TC 46 and/or TC 86.
2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
IEC 60068-1 :201 3, Environmental testing – Part 1: General and guidance
IEC 60352-1 :1 997, Solderless connections – Part 1: Wrapped connections – General requirements, test methods and practical guidance
IEC 60352-2:2006, Solderless connections – Part 2: Crimped connections – General requirements, test methods and practical guidance
IEC 60352-2:2006/AMD1 :201 3 IEC 60352-3:1 993, Solderless connections – Part 3: Solderless accessible insulation displacement connections – General requirements, test methods and practical guidance
3 Terms and definitions
For the purposes of this document, the terms and definitions given in IEC 61 076-1 as well as the following apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
• IEC Electropedia: available at http://www.electropedia.org/
• ISO Online browsing platform: available at http://www.iso.org/obp
3.1 ambient temperature
temperature of the air in free air conditions at such a distance from the specimen that the effect of the dissipation is negligible
Note 1 to entry: In practice, the ambient temperature is taken as the average of temperatures measured at a number of points in a horizontal plane situated between 0 mm and 50 mm below the specimen at half the distance between the specimen and the wall of the chamber, or at 1 m distance from the specimen, whichever is less.
Suitable precautions should be taken to avoid heat radiation affecting these measurements.
[SOURCE: IEC 60068-1 : 201 3, 3.9.2]
3.2 combined test
test during which a specimen is subjected simultaneously to two or more environmental influences
Note 1 to entry: Tests with simultaneous influence of a) temperature and humidity; b) temperature, humidity and
specific (including chemically active) medium; and c) temperature and solar radiation are not related to combined tests.
Note 2 to entry: Combined tests, as a rule, are used to provide simultaneous climatic and mechanical influences.IEC 60512-1 pdf download.