IEC 62868-1-2020 pdf download.Organic light emitting diode (OLED) light sources for general lighting – Safety – Part 1: General requirements and tests.
This part of IEC 62868 specifies general safety requirements of OLED products for use on DC supplies up to 1 000 V or AC supplies up to 1 000 V at 50 Hz or 60 Hz for indoors and similar general lighting purposes.
This document applies to any OLED light sources which are not covered by IEC 62868-2 (all parts).
NOTE 1 Only test methods for DC operated OLED light sources are provided in this document. Provisions for AC operated OLED products are under consideration.
NOTE 2 The construction of OLED tiles and panels is illustrated in Figure A.1 to Figure A.4 in Annex A.
NOTE 3 The OLED lighting system consisting of OLED panels or modules is illustrated in Annex D.
NOTE 4 This document applies to OLED light sources (tiles, panels, modules) which are composed of OLED luminaires or OLED lamps, and it is intended so that the OLED light source in accordance with this document fits in
IEC 60598 (all parts) as a component of lighting equipment, in combination with other components.
NOTE 5 Where an appropriate Part 2 of IEC 62868 for an OLED light source does not exist, the nearest applicable Part 2 of IEC 62868 can be used as a guide to the requirements and tests.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
IEC 60598-1 :201 4, Luminaires – Part 1: General requirements and tests
IEC 60598-1 :201 4/AMD1 :201 7
IEC 60068-2-6:2007, Environmental testing – Part 2-6: Tests – Test Fc: Vibration (sinusoidal)
IEC 62504, General lighting – Light emitting diode (LED) products and related equipment – Terms and definitions
IEC TR 62854:2014, Sharp edge testing apparatus and test procedure for lighting equipment – Tests for sharpness of edge
IEC TS 62972, General lighting – Organic light emitting diode (OLED) products and related equipment – Terms and definitions
ISO 4046-4:201 6, Paper, board, pulps and related terms – Vocabulary – Part 4: Paper and board grades and converted products
3 Terms and definitions
For the purpose of this document, the terms and definitions given in IEC 62504 and
IEC TS 62972 and the following apply.
ISO and IEC maintain terminological databases for use in standardization at the following
addresses:
• IEC Electropedia: available at http://www.electropedia.org/
• ISO Online browsing platform: available at http://www.iso.org/obp
3.1 organic light emitting diode
OLED light emitting semiconductor consisting of an electroluminescent zone made of organic compounds, situated between two electrodes
Note 1 to entry: This note applies to the French language only.
3.2 OLED tile
smallest functional OLED light source which cannot be separated into smaller OLED lighting elements containing at least one contact ledge with at least one positive and one negative pole for connection to the electrical power supply
3.3 OLED panel
independently operable unit OLED product containing an OLED tile and means of connection to the electrical supply
Note 1 to entry: An OLED panel may have a connector, PCB (printed circuit board), passive electronic components and optionally a frame.
3.4 OLED module
assembly of one or more OLED panels and active electronic components
Note 1 to entry: The classification of OLED modules is given in Annex E.
3.5 semi-integrated OLED module
OLEDsi module
OLED module which carries the control unit of the controlgear, and is operated by the separated power supply of the controlgear
3.6 integrated OLED module
OLEDi module OLED module incorporating controlgear and any additional elements necessary for stable operation of the light source, designed for direct connection to the supply voltage
3.7 integral OLED module
OLED module, designed to form a non-replaceable part of a luminaire
3.8 built-in OLED module
OLED module, designed to form a replaceable part to be built into a luminaire, a box, an enclosure or the like and not intended to be mounted outside a luminaire.IEC 62868-1 pdf download.