IEC 60964-2018 pdf download.Nuclear power plants – Control rooms – Design.
This document establishes requirements for the human-machine interface in the main control rooms of nuclear power plants. The document also establishes requirements for the selection of functions, design consideration and organization of the human-machine interface and procedures which are used systematically to verify and validate the functional design. These requirements reflect the application of human factors engineering principles as they apply to the human-machine interface during plant operational states and accident conditions (including design basis and design extension conditions), as defined in IAEA SSR-2/1 and IAEA NP-T-3.1 6. This document does not cover special purpose or normally unattended control points, such as those provided for shutdown operations from outside the main control room or for radioactive waste handling, or emergency response facilities. Detailed equipment design is outside the scope of this document. The primary purpose of this document is to provide functional design requirements to be used in the design of the main control room of a nuclear power plant to meet operational and safety requirements. This document also provides functional interface requirements which relate to control room staffing, operating procedures, and the training programmes which, together with the human-machine interface, constitute the control room system. This document is intended for application to new control rooms whose conceptual design is initiated after the publication of this document. If it is desired to apply it to an existing control room, special caution must be exercised so that the design basis is kept consistent.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
IEC 60671 , Nuclear power plants – Instrumentation and control systems important to safety – Surveillance testing
IEC 60709, Nuclear power plants – Instrumentation and control systems important to safety – Separation
IEC/IEEE 60780-323, Nuclear power plants – Electrical equipment of the safety system – Qualification
IEC 60960, Functional design criteria for a safety parameter display system for nuclear power stations
IEC 60965, Nuclear power plants – Control rooms – Supplementary control room for reactor shutdown without access to the main control room
IEC 60980, Recommended practices for seismic qualification of electrical equipment of the safety system for nuclear generating stations
IEC 61 225, Nuclear power plants – Instrumentation and control systems important for safety – Requirements for electrical supplies
IEC 61 226, Nuclear power plants – Instrumentation and control important to safety – Classification of instrumentation and control functions
IEC 61 227, Nuclear power plants – Control rooms – Operator controls
IEC 61 51 3, Nuclear power plants – Instrumentation and control important to safety – General requirements for systems
IEC 61 771 , Nuclear power plants – Main control room – Verification and validation of design
IEC 61 772, Nuclear power plants – Main control room – Application of visual display units (VDUs)
IEC 61 839, Nuclear power plants – Design of control rooms – Functional analysis and assignment
IEC 62003, Nuclear power plants – Instrumentation and control important to safety – Requirements for electromagnetic compatibility testing
IEC 62241 , Nuclear power plants – Main control room – Alarm functions and presentation
IEC 62645, Nuclear power plants – Instrumentation and control systems – Requirements for security programmes for computer-based systems.IEC 60964 pdf download.