IEC 63056-2020 pdf download. Secondary cells and batteries containing alkaline or other nonacid electrolytes – Safety requirements for secondary lithium cells and batteries for use in electrical energy storage systems (IEC 63056:2020).
This document specifies requirements and tests for the product safety of secondary lithium cells and batteries used in electrical energy storage systems (Figure 2) with a maximum DC voltage of 1 500 V (nominal).
Basic safety requirements for the secondary lithium cells and batteries used in industrial applications are included in IEC 6261 9. This document provides additional or specific requirements for electrical energy storage systems.
Since this document covers batteries for various electrical energy storage systems, it includes those requirements which are common and minimum to the electrical energy storage systems.Examples of appliances that are within the scope of this document are:
• telecommunications,
• central emergency lighting and alarm systems,
• stationary engine starting,
• photovoltaic systems,
• home (residential) energy storage systems (HESS), and
• large energy storage: on-grid/off-grid.
This document applies to cells and batteries for uninterruptible power supplies (UPS).
This document does not apply to portable systems 500 Wh or below, which are covered by IEC 61 960-3.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
IEC 60050-482, International Electrotechnical Vocabulary (IEV) – Part 482: Primary and secondary cells and batteries (available at http://www.electropedia.org/)
IEC 60695-1 0-2, Fire hazard testing – Part 10-2: Abnormal heat – Ball pressure test method
IEC 60695-1 1 -1 0, Fire hazard testing – Part 11-10: Test flames – 50 W horizontal and vertical flame test methods
IEC 60950-1 :2005, Information technology equipment – Safety – Part 1: General requirements
IEC 6261 9, Secondary cells and batteries containing alkaline or other non-acid electrolytes – Safety requirements for secondary lithium cells and batteries, for use in industrial applications
IEC 62620:201 4, Secondary cells and batteries containing alkaline or other non-acid electrolytes – Secondary lithium cells and batteries for use in industrial applications
ISO/IEC Guide 51 , Safety aspects – Guidelines for their inclusion in standards
3 Terms and definitions
For the purposes of this document, the terms and definitions given in IEC 60050-482,
ISO/IEC Guide 51 , and the following apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
• IEC Electropedia: available at http://www.electropedia.org/
• ISO Online browsing platform: available at http://www.iso.org/obp
3.1 safety
freedom from unacceptable risk
3.2 risk
combination of the probability of occurrence of harm and the severity of that harm
3.3 harm
physical injury or damage to the health of people or damage to property or to the environment
3.4 hazard
potential source of harm
3.5 intended use
use of a product, process or service in accordance with specifications, instructions and information provided by the supplier