IEC 63044-6-2021 pdf download.Home and building electronic systems (HBES) and building automation and control systems (BACS) – Part 6: Requirements for planning and installation.
This document specifies the requirements for planning and installation of HBES/BACS and the supporting infrastructure.
Radio frequency (RF) HBES/BACS are also considered.
Safety requirements are covered by IEC 60364 (all parts).
Information and communication technology (ICT) and broadcasting and communication technology (BCT) network installations are typically interfaced with HBES/BACS.
The requirements for ICT and BCT network installations are covered by ISO/IEC 1 4763-2.
This document does not cover HBES/BACS implementation with:
– optical fibre,
– power lines,
– power over Ethernet (PoE).
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies.
For undated references, the latest edition of the referenced document (including any amendments) applies.
IEC 60364-4-41 , Low-voltage electrical installations – Part 4-41: Protection for safety – Protection against electric shock
IEC 60364-4-44, Low-voltage electrical installations – Part 4-44: Protection for safety – Protection against voltage disturbances and electromagnetic disturbances
IEC 60364-5-54, Low-voltage electrical installations – Part 5-54: Selection and erection of electrical equipment – Earthing arrangements and protective conductors
IEC 63044-1 , Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) – Part 1: General requirements
IEC 63044-3, Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) – Part 3: Electrical safety requirements
IEC 63044-4, Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) – Part 4: General functional safety requirements for products intended to be integrated in HBES and BACS
IEC 63044-5 (all parts), Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) – Part 5: EMC requirements
IEC 61 386-24, Conduit systems for cable management – Part 24: Particular requirements – Conduit systems buried underground
ISO/IEC 1 1 801 -1 , Information technology – Generic cabling for customer premises – Part 1: General requirements
ISO/IEC 1 4763-2, Information technology – Implementation and operation of customer premises cabling – Part 2: Planning and installation
3 Terms, definitions and abbreviated terms
3.1 Terms and definitions
For the purposes of this document, the terms and definitions given in IEC 63044-1 and the following apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
• IEC Electropedia: available at http://www.electropedia.org/
• ISO Online browsing platform: available at http://www.iso.org/obp
3.1 .1 BCT cabling
broadcast and communication technologies cabling cabling system designed to support applications using the HF band (3 MHz to 30 MHz), the VHF band (30 MHz to 300 MHz) and the UHF band (300 MHz to 3 000 MHz) for transmission of sound radio, TV and two-way data services, as well as for in-home inter-networking, as defined in ISO/IEC 1 1 801 -1
3.1 .2 HBES/BACS application
single automated action performed by HBES/BACS (see definition 3.1 .4)
Note 1 to entry: Applications are normally integrated to perform higher-level actions.
3.1 .3 home/building network
network for digital and analogue information transport for a home or a building, providing defined access points and using one or more media in any topology
3.1 .4 ICT cabling
information and communication technologies cabling cabling system designed to support applications using information and communicationtechnologies, as defined in ISO/IEC 1 1 801 -1.IEC 63044-6 pdf downlaod.